Make slave images appear on your page after a set period of time!

Apply the Blast Timer action to the page from the Page > Actions Menu.

Next set up your Slave Images:

1. Apply the Slave Show/Hide Image action to each image you want triggered by the Blast Timer - You can also use the Slave Image or the Slave Show Hide Layer actions too.

2. Set the Initially to Hidden, Restore to 'No' to prevent the images from flashing on the page.

3. Choose a Slave Group - Indigo is fine, unless you are currently using other slave images on the page that you don't want included.

4. Click the Slave# popup and allocate a number to each image.

Click on an empty area on the page so the Blast Timer action appears win the Action Palette. Set the parameters as follows:

Speed - the time delay before the slave images load. 500 is about half a second

Slave Group - This should be the same as the images that are to be triggered

Find Slaves - If you are using Frames, setting to Top will search the whole Frameset for the slave images, Parent will search the Parent frame (if using nested Frames), or This to search for slave images on the same page. If you're not using Frames, leaving as top is fine, unless you have problems after uploading then try changing to 'this'

Trigger - Setting this to yes will correspond with the slaves you want to activate: Trigger 1 will activate Slave# 1, Trigger 2 activates Slave #2 and so on.